What is the infrared thermal imaging inspection and maintenance model that prioritizes prevention?
In recent years, due to the impact of macro economy, the international shipping industry is sluggish, the replacement cycle of ships is prolonged, and the owner of the ship is more sensitive to the maintenance cost. The high cost of maintenance cycle model, the past commonly used, relatively more effective operation time of crowding; and through predictive maintenance can be found hidden in advance to repair, replace only the actual service life has been at or near the limit of parts, reduce the maintenance time is invalid and spare parts waste, reduce the maintenance costs of the actual ship.
We are GuoNeng electric E/R ECR MSB ESB EMERGENCY GENERATOR TRANSFORMER ACCOM GENERAL SERVICE TRANSFORMER SWITCHBOARD REEFER CONTAINER TRANSFORMER SWITCHBOARD infrared thermographic detection /thermalgraphy imaging for standard container ships, freezer ship,oil ship, and various large ships . Infrared thermographic/ Thermalgraphy imaging for MAIN CONTROL ROOM PANEL , 440V/ FEEDER PANEL GROUP STARTER PANEL GENERATOR PANEL EMERGENCY GENERATOR PANEL SWTICHBOARD
And ultrasonic inspection check for
6600V Panel (because they can not be opnened)
Before we quote,we want to know
How much panel and equipment
You want to infrared thermographic/ Thermalgraphy check./ failing wire termination in switch/
Infrared thermal imaging detects faulty wire terminals in switches
NKTEVA6 distributed red array detector, the red array video can be recorded and captured
It can be configured with a touch screen, powered by a USB power bank, and can be networked
The new version of the Red Array has a wider field of view of 90 degrees
Network powered/POE-powered fixed installation
The Red Formation responds faster
One computer on the host computer workstation can run multiple sets of monitoring software at the same time
Internet exaggeration browsing
Windows PC ANDROID phone
Mobile browsing is faster
TS501-94 Distributed Red Array Detector
TS501-95 Red Array Controller 8/16 ports
.jpg)
Optional accessories
DC5V power bank USB input single-port POE output red array controller tester
(Can be flexibly applied to outdoor engineering POE power supply test and image test red array field of view angle adjustment)
Removable or handheld 5V power supply
Support power supply
The power bank can be replaced at any time
After modifying the handheld, it can have unlimited battery life
Portable small controllers are available
It can be plugged into AC220V to charge the power bank
It can also transmit a wifi signal through the controller
Multi-person real-time sharing of red array maps, thermal imaging maps, and visible light maps
It can record and capture the detection process in real time with multiple mobile phones and computers
Real-time safety monitoring and fault recording of the testing process
Note that the height of the power bank/power bank that can be clamped is 110-185mm
Note that the width of the clampable phone is 58-90mm
Comes with LED
NKTEVA6 Distributed Red Array Detector Monitoring Software 2024 Version Instructions for Use
No software installation required Does not occupy the registry Safer Less system resources Faster Runs can be run by unzipping
Support
